Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONTENTS
FOREWORD AND GENERAL ADVICE
Read carefully the advice in this handbook as it provides important indications regarding safety during installation, use and
maintenance. Make sure to store this handbook for future reference. This appliance has to be exclusively for the use it has
been designed for. ANY OTHER USE IS TO BE CONSIDERED INAPPROPRIATE AND THEREFORE DANGEROUS.
The Manufacturer shall not be considered as responsible for any damages deriving from inappropriate, wrong and
unreasonable use. Operating any electrical appliances requires some fundamental rules to be carefully observed, i.e.:
-
do not touch the appliance with wet hands or feet;
-
do not use the appliance with bare feet;
-
do not pull the power cord to unplug the appliance from the socket;
-
do not expose the appliance to atmospheric agents;
-
do not let infants, children and incompetent people use the appliance.
Before performing any cleaning or maintenance, unplug the appliance, either by removing the plug from the socket or
disconnecting the main electrical supply.
In case of failure or malfunctioning, turn off the appliance and avoid fixing it directly. For any maintenance operations please
exclusively address an authorized OBEL SRL technical centre requesting exclusively original spare parts to be used.
Failure to comply to what stated above may result in lower safety levels and loss of warranty coverage. If this appliance will
no longer be used, we recommend making it inactive by unplugging the power cord.
INSTALLATION RULES
Installation must be performed in accordance to the indications provided by the Manufacturer. A wrong installation may lead
to damages or injuries to people, animals and objects, which the Manufacturer shall not be considered as responsible for.
Once the packaging has been removed, please make sure that the appliance is intact. In case of doubt do not use the
appliance and address to an authorized Dealer. Packaging parts (plastic bags, foam, nails, etc.) must not be left within
children's reach as they might be hazardous and must not be disposed of.
Before plugging in the appliance make sure that its technical features are suitable for the electrical systems it is going to be
used on. If the socket and the plug (if fitted) are not compatible please have the socket replaced with a suitable one, making
sure that the diameter of the cord is suitable to the appliances power absorption . In case of cord replacement it is
compulsory to use a H07RN-F compliant cord.
Make sure that the power supply matches the one the appliance has been designed for and that the existing wiring can bear
the absorption of the newly-installed appliance, as well as of the existing devices. After installing a circuit-breaker with fuses,
connect the cord wires of the appliance to the circuit breaker in accordance to the related schematics.
page 06
page 06
page 07
page 07
page 08
page 08
page 08
page 08
page 09
6
Werbung
Inhaltsverzeichnis
Fehlerbehebung
