Beha-Amprobe LT-10 Bedienungsanleitung Seite 9

1.800.561.8187
1
2
Attaching and Removing the Adapter Plate
LAMP TEST
• Verify lamp test function on a known lamp and/or on the identical
lamp model both before and after use to ensure the instrument is in
good working condition.
• On a very few particular linear fluorescent types, testing against the
glass surface of the lamp may not respond. Testing on the lamp socket
pin via the instrument's probe (direct metal-to-metal contact) shall
allow good lamp response from a working lamp.
www.
information@itm.com
.com