General Safety; Safety Instructions - Atag VA5114BT Benutzerinformation

30

General Safety

This appliance is intended to be used in household and
•
similar applications such as:
farm houses; staff kitchen areas in shops, offices and
–
other working environments;
by clients in hotels, motels, bed & breakfast and other
–
residential type environments.
Do not change the specification of this appliance.
•
The operating water pressure (minimum and maximum)
•
must be between 0.5 (0.05) / 8 (0.8) bar (MPa)
Follow the maximum number of 14 place settings.
•
If the supply cord is damaged, it must be replaced by the
•
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
Put the cutlery in the cutlery basket with the sharp ends
•
pointing down or put them in the cutlery drawer in a
horizontal position with the sharp edges down.
Do not leave the appliance with the open door unattended
•
to avoid stepping accidentally onto it.
Before any maintenance operation, deactivate the
•
appliance and disconnect the mains plug from the socket.
Do not use high pressure water sprays and/or steam to
•
clean the appliance.
If the appliance has ventilation openings in the base, they
•
must not be covered e.g. by a carpet.
The appliance is to be connected to the water mains using
•
the new supplied hose-sets. Old hose sets must not be
reused.

SAFETY INSTRUCTIONS

Installation
WARNING! Only a qualified
person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Do not use the appliance before
installing it in the built-in structure due
to safety manner.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.