Temperature Setting - De Dietrich 56254 Bedienungsanleitung

Digital clock thermostat
ref. 56254
Thermostat has been designed to offer you comfort and energy
savings. It allows you to program and adjust your heating or air
conditioning according to 3 temperature levels:
- Comfort temperature: this is the temperature for your hours
of presence.
- Reduced temperature: this is the temperature for your brief
absences or during the night.
- Frost-protection temperature: this is the minimum tempe-
rature for long absences. It protects your dwelling from the risk
of frost.
These 3 pre-recorded programs and a blank program will allow
you to adapt your heating each day to your life style.
This instruction leaflet introduces you to the different functions of
thermostat.
Inserting or re-inserting the
batteries
Thermostat is equipped with a warning light to indi-
cate when the batteries need replacing. As soon as
this indicator lights up at the bottom right-hand side
of the display panel, replace the batteries (use two
1.5V UR6 alkaline batteries - life is approximately
18 months): thermostat remains programmed for
60 seconds while batteries are being replaced.
Before beginning the program-
!
ming of the device, please slide
cover down and press RESET
with the tip of a pen.
Setting to current time and day
- You are putting the device into
operation for the first time.
- You have just pressed the
RESET button (see above).
- 12:00 appears and the pointer
L
flashes under day 1.
u
Auto Manu 1 2 3 4 5
+
-
DAYS PROG
OK
1-7 P1-P4
Set the time using the +/– buttons (the numbers
run off more quickly when the button is pressed
continuously).
Set the current day by pressing several times on
the DAYS 1-7 button.A pointer
the corresponding day (1=Monday, 2=Tuesday,
3=Wednesday, etc.)
Validate with the OK button.
If you wish to change the time or the day:
press the MODE button until the pointer
appears under the clock sign and continue as above
for points , and .
+/– buttons for
adjusting settings
Indicator for
temperature level
"comfort"
or "reduced"
(1=Monday, 2=Tuesday....

Temperature setting

Comfort and reduced temperatures are pre-set:
comfort = 20°C, reduced = 16°C
+
-
DAYS
1-7
Modification of Comfort temperature
Press the comfort button.
Modify the temperature with the +/– buttons.
Validate with OK.
Modification of Reduced temperature
Press the reduced button.
Modify the temperature with the +/– buttons.
Validate with OK.
22 23 24
Programming
You can program your week according to 4
Res
program settings:
P1, P2, P3 : are pre-recorded and cannot be modified.
P4 :
1 2 3 4
P1 = Comfort temperature from 6 a.m. till 11 p.m.
Reduced temperature from 11 p.m till 6 a.m.
The standard allocation of P1 is to 7 days of the week.
If this corresponds to your life style, stay in automatic
mode. Otherwise, continue.
6 7
MODE
MODE
0 1 2 3 4
P2 = Comfort temperature from 6 a.m.till 8.30 p.m.
and from 4.30 p.m. till 11 p.m. Reduced tempe-
rature from 8.30 a.m. till 4.30 p.m. and from 11
Res
p.m. till 6 a.m.
0 1 2 3 4
P3 = Comfort temperature from 6 a.m. till 8.30
p.m. from 11.30 a.m. till 1.30 p.m. and from
4.30 p.m. till 11 p.m. Reduced temperature
from 8.30 a.m. till 11.30 a.m.from 1.30 p.m.
L
appears under
till 4.30 p.m. and from 11 p.m. till 6 a.m.
0 1 2 3 4
P4 = Blank program allowing you to create up to
L
12 comfort temperature periods and 12
reduced periods for each day of the week.
"Reduced"
indicating day
temperature
"Comfort"
temperature
Auto Manu
+ ¡c
¡c
-
0 1 2 3 4 5
current
DAYS
PROG
1-7 P1-P4
Days of the P1 to P4 Comfort
week selection programme temperature
selection setting
7=Sunday)
Auto Manu 1 2 3 4 5 6 7
c
°c
°c
c
PROG
OK
P1-P4
is blank and allows you to create a
personalized program varying accor-
ding to the day of the week.
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
3 3
Warning light
Pointer Ambient
to indicate
temperature
battery wear
of the week
1 2 3 4 5 6 7
¡c
timer
days
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
OK
Reduced
Validation
temperature
setting
Selection of an existing P1, P2 or P3
programme for a day of the week (in
programming mode all modifications are
automatically validated).
Example - P2 for Wednesday
Auto Manu
1
+
°c
MODE
°c
-
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
DAYS
PROG
Res 1-7 P1-P4
Press the PROG P1-P4 button to go into
programming mode.
The n° of the program assigned to the day flashes
on the right-hand side of the display panel.
Press the DAYS 1-7 until the pointer
under the day you wish to program (Wednesday in
our example).
Press the PROG P1-P4 button until the P2 pro-
gram number flashes in the right side of the screen.
Press the OK button to validate.The following day
PROG
P1-P4 is automatically proposed.
Creating a P4 program
A 24-hour profile composed of 48 thermometers at
the bottom of the display panel allows your
rogramme composition to be easily viewed.
half-empty thermometer corresponds to
30 minutes at reduced temperature.
A full thermometer corresponds to
30 minutes at comfort temperature.
Example - programming 3 temperature periods for
Friday: 6 a.m. till 8 a.m., noon till 2 p.m. and 6 p.m.
till 10 p.m.
Auto Manu 1
+
°c
°c
-
0 1 2 3 4 5 6 7 8
0 1
DAYS PROG
1-7
P1-P4
From the AUTO mode press the PROG P1-P4
button.
Press the DAYS 1-7 button until a pointer
appears under the day you wish to program (Friday
in our example).
Press the PROG P1-P4 button until the P4
program number flashes in the right side of the
screen.Your display panel indicates time as 0h00
and the first thermometer flashes on the 24-hour
profile.
Heating
start-up
indicator
Mode
selection
Prolonged
absence
MODE
(holidays)
Viewing of
"comfort" and
"economical"
periods"
Res
RESET
2 3 4 5 6 7
MODE
OK
Res
L
appears
2 3 4 5 6 7
MODE
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
OK
Res
L