Residual Heat Indicator; Daily Use; The Heat Setting; Hints And Tips - Zanussi ZHRN641K Benutzerinformation

Display

4.4 Residual heat indicator

WARNING!
There is a risk of burns from
residual heat.

5. DAILY USE

WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch for 1 second to activate or
deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth, etc.). An acoustic
signal sounds and the hob deactivates.
Remove the object or clean the control
panel.
• you do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:

6. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
Description
Automatic Switch Off operates.
The indicators show the level of the residual
heat for the cooking zones you are currently
using. The indicators may also come on for
the neighbouring cooking zones even if you
are not using them.
Heat setting
1 - 2
3 - 4
5
6 - 9
5.3 Selecting the cooking zone
To select a cooking zone touch the sensor
field corresponding to this zone. The
display shows the heat setting (

5.4 The heat setting

Set the cooking zone.
Touch to increase the heat setting. Touch
to decrease the heat setting. Touch
and at the same time to deactivate the
cooking zone.
6.1 Cookware
The bottom of the cookware
must be as thick and flat as
possible.
Ensure pan bases are clean and
dry before placing on the hob
surface.
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
).
ENGLISH 59