Storage; Display Error Codes - ecofort ecoQ 30L Energy Saver Benutzerhandbuch

Storage

If the dehumidifier will not be used for a long period of time, take the following steps:
1. Remove the plug from the socket and empty the tank, make the tank and the
dehumidifier dry completely, this may take a couple of days.
2. Clean the air filter.
3. Check the dehumidifier for perfect condition to ensure a safe use of it after a long period
of storage.
4. Pack the device with the suitable packaging.
5. Store the dehumidifier in a dust-free and out of direct sunlight location, preferably
covered with a sheet of plastic.

Display Error Codes

Please contact local distributor if any of the error codes below appears:
Display Code
Error
Display
What is happening
E1
Temperature sensor error
Flash every 30 seconds
Device still dehumidifies but
is in defrost mode only.
81
E2
Humidity sensor error
Flash every 30 seconds
Device still dehumidifies but
is in continuous
dehumidifying mode only.