Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Introduction
1.
Introduction
1.1
Safety notes
WARNING
Never grab between the dies during a pressing is proceeding.
WARNING
If you don't pay attention you're in danger of life!
Never work with energised conductors. Ensure that voltage has been
switched of before starting to work and check this with adequate instruments.
CAUTION
Alteration of the tool is absolutely prohibited.
CAUTION
Before each usage the tool must be checked for damage and / or abra-
sion. When detecting visible damage you're not allowed to work with the
tool in any case.
NOTICE
Only our Weidmüller Interface GmbH & Co. KG service department is
permitted to carry out required repairs.
• Before finishing a pressing control whether the two profiles dies lie completely on top
of each other. Only this guarantees an accurate pressing.
• Pay attention to the necessary number of crimpings.
• This instruction manual has always to be available when using the tool.
•
Take care that only persons who have acquainted themselves with this manual be-
fore processing and who have understood it are allowed to work with the tool.
22
1548670000/00/06.14
Werbung
Kapitel
Inhaltsverzeichnis
