English | 15 - Bosch GBH 5-38 D Professional Originalbetriebsanleitung

OBJ_BUCH-273-002.book Page 15 Tuesday, June 22, 2010 11:24 AM
g) If devices are provided for the connec-
4) Power tool use and care
a) Do not force the power tool. Use the cor-
b) Do not use the power tool if the switch
c) Disconnect the plug from the power
d) Store idle power tools out of the reach of
e) Maintain power tools. Check for mis-
f) Keep cutting tools sharp and clean. Prop-
g) Use the power tool, accessories and tool
Bosch Power Tools
Downloaded from www.Manualslib.com
tion of dust extraction and collection fa-
cilities, ensure these are connected and
properly used. Use of dust collection can
reduce dust-related hazards.
rect power tool for your application. The
correct power tool will do the job better
and safer at the rate for which it was de-
signed.
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be re-
paired.
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may affect the power tool's op-
eration. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
erly maintained cutting tools with sharp
cutting edges are less likely to bind and
are easier to control.
bits etc. in accordance with these in-
structions, taking into account the work-
ing conditions and the work to be per-
formed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
manuals search engine
5) Service
a) Have your power tool serviced by a qual-
ified repair person using only identical
replacement parts. This will ensure that
the safety of the power tool is maintained.
Hammer Safety Warnings
Wear ear protectors. Exposure to noise can
cause hearing loss.
Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal in-
jury.
Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory
contacting a "live" wire may make exposed
metal parts of the power tool "live" and
could give the operator an electric shock.
Use suitable detectors to determine if utili-
ty lines are hidden in the work area or call
the local utility company for assistance.
Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can
lead to explosion. Penetrating a water line
causes property damage or may cause an
electric shock.
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
1 609 929 V37 | (22/6/10)

English | 15