Inserting The Batteries; Operating The Remote Control - Panasonic CS-VA70KE Bedienungsanleitung

OPEN
Gently press the
place
[OPEN]
slide the cover
toward you.
Set the power switch to " " (OFF) when:
The air conditioner is not going to be used for
an extended period of time.
If the power switch is left at "I" (ON), approximately
2.5 watts of electric power are used even if the main
unit is turned off using the remote control.
There is a danger of lightning damage.
The air conditioner is provided with a built-in protective
device, but the control equipment may be adversely
affected depending on the extent of lightning activity.
Downloaded from www.Manualslib.com

Inserting the batteries

marked
and
–
+
+
(Two R03 Panasonic dry-cell
batteries or equivalent)

Operating the remote control

Make sure that the
signal path is not
obstructed.
The maximum dis-
tance at which signals
can be received is
about 10 m.
manuals search engine
Fix the cover to the back of the remote
control ("PM 12:00" will flash in the opera-
tion display.)
+ – Be sure
that the (+) and
–
(–) directions
are correct.
If the display does not appear when the batteries
are inserted, remove the batteries and
insert them once more.
Aim at the signal receptor on the room air condi-
tioner when operating.
Do not drop or throw the remote control.
Do not place the remote control in a location that
is exposed to direct sunlight or next to a heating
unit or other heat source.
Signal confirmation sounds.
Stopping by pressing the OFF/ON
change of mode: A long beep.
Other cases: A short beep.
Regarding the batteries.
The batteries can be used for approximately one year.
Do not
because such batteries may differ from standard
dry-cell batteries in shape, dimensions, and
performance.
Be sure to replace both batteries with two new
batteries of the same type.
Remove the batteries if the air conditioner is not going
to be used for an extended period of time.
PM
button and
use rechargeable (Ni-Cd) batteries
8