Orient TTKFB Bedienungsanleitung Seite 15

[Notes on the movement of the stopwatch 1/20 second hand]
• After the stopwatch is started, the stopwatch 1/20 second hand moves for
about 10 minutes and automatically stops at "0" position.
• When split time is measured or the measurement is stopped, if moves to
indicate the elapsed 1/20 seconds.
• After split time is released or the measurement is restarted, it moves for
about 10 minutes and stops automatically.
• In the same manner, if the stopwatch is stopped and restarted repeatedly
or split time is measured and released repeatedly, it moves for about 10
minutes and stops automatically.
 How to reset the stopwatch
• When the stopwatch hands are counting:
(1) Press button A to stop the stopwatch.
(2) Press button B to reset the stopwatch.
• When the stopwatch hands are stopped:
One of the following three stopwatch operations
has occurred. Reset the stopwatch accordingly.
[The stopwatch was stopped in "Standard measurement" or "Accumulated
elapsed time measurement."]
(1) Press button B to reset the stopwatch.
[Split time was measured and remains displayed "Split time
measurement."]
(1) Press button B. The split time is released and the stopwatch hands
move quickly to indicate the measurement in progress.
(2) Press button A to stop the stopwatch.
(3) Press button B to reset the stopwatch.
[The time of the 2nd competitor was measured in "Measurement of two
competitors."]
(1) Press button B. The stopwatch hands move quickly and stop.
(2) Press button B to reset the stopwatch.
Downloaded from www.Manualslib.com manuals search engine
A
B
15