How To Use The Stopwatch - Orient TTKFB Bedienungsanleitung

(3) After all the adjustments are completed,
push the crown back in to the normal
position.
* The position of the crown or date indicator may
vary on some models.
* About date correction at month's end:
Date correction is necessary for months with 30 days or less. In this case,
set the date to the [1st day] on the first day of the next month.
 HOW TO USE THE STOPWATCH
• The stopwatch can measure up to 12 hours in 1/20 second increments.
After 12 hours, it will automatically stop.
• The time measured is indicated by the four stopwatch hands that move
independently of the hands for time display.
• After the stopwatch is started, the stopwatch 1/20 second hand moves for
about 10 minutes and automatically stops at "0" position. When split time is
measured or the measurement is stopped, it moves to indicate the elapsed
1/20 seconds.
• Split time measurement is available.
[How to read the stopwatch hands]
The time measured is indicated by the four stopwatch hands (stopwatch 1/20
second, second, minute and hour hands).
<Note on adjusting the stopwatch hand position>
• If the stopwatch hands do not return to "0" position when the stopwatch
is reset, follow the procedure in " SETTING THE TIME AND
ADJUSTING THE STOPWATCH HAND POSITION" to reset them.
• In that case, be sure to adjust the hands for time display to the current
time.
14
Downloaded from www.Manualslib.com manuals search engine