Transmitting Data - Bodytel Weight Tel Benutzerhandbuch

30
4 Using WeightTel
If you want to transmit measured data into your online patient file at
http://www.bodytel.de please remain on the scale for approximately 4 seconds after the
weight has been displayed. Please follow the instructions given in Chapter 4.8
"Transmitting data". Should you not wish to transmit data leave the weighing platform.
The scale will automatically shut down after approximately 5 seconds.
4.8

Transmitting data

During the transmission the measurements will be transmitted to your online patient file at
http://www.bodytel.com.
During transmission the blue Bluetooth® status LED will start flashing. Upon completion,
the LED will be activated constantly for 5 seconds. After that the scale will shut down. In
case of a transmission failure the LED will turn off and the scale will display an error code
(see chapter 6 "Troubleshooting") for 5 seconds.
Note: To transmit data the BodyTel Mobile software must be open and Bluetooth® must
be activated on your mobile phone (smartphone) or Home Gateway.