Pairing Weighttel - Bodytel Weight Tel Benutzerhandbuch

28
4.5

Pairing WeightTel

1. Please start the BodyTel Mobile application on your mobile phone (smartphone) or
Home Gateway.
2. Enter your BodyTel user account data.
3. When starting the software for the first time the application will ask you whether you
would like to pair a device now. Please confirm with "Yes".
4. Choose WeightTel from the device list.
Note: Your mobile phone or Home Gateway should be in close proximity to the WeightTel
scale because the scale will always attempt to pair with the device sending the strongest
Bluetooth® signal. Make sure that no other Bluetooth® enabled devices (mobile phones,
computers, etc.) are close to the WeightTel while pairing.
6. Check your mobile phone or Home Gateway and confirm all connection requests.
7. Enter the Bluetooth® password "
the scale will flash twice and the display will show "PAI".
5. Press the pairing key located at the bottom side of the
scale's display (see left picture) until the display shows
the word "COP". At the same time the Bluetooth® status
LED will start flashing. The scale will now try to pair with
the device sending the strongest Bluetooth® signal. The
process is complete when the status LED is constantly on.
Note: If you press the pairing key during the pairing pro-
cess the process will be terminated. To start over please
repeat step 5.
9676
". On successful connection the status LED on
4 Using WeightTel