3. Using the Baby Monitor
3.1
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's head by rotating the camera up, down, left
and right until you are satisfied with the image in the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2
The camera can be remotely controlled from the Parent Unit.
1. Press the
2. Press the
3.3
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the
dark. When the built-in photo sensor on the top of the unit detects a low level of
ambient light, the LEDs will automatically activate and the screen on the Parent Unit
will display in black and white. The
3.4
Press and hold the
Baby Unit's loudspeaker. The
3.5
V
Press
leaving the audio monitor on.
3.6
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED if
the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading
will change to LL °C / °F if the temperature goes below 1°C / 34°F.
Using the Baby Monitor
Downloaded from
www.Manualslib.com
Setting up
Pan and Tilt
UP button or
LEFT button or
Night Vision Mode
Talk Mode
T
TALK button on the Parent Unit to talk to your baby through the
Video ON/OFF
VIDEO ON/OFF key to turn the LCD display on or off, whilst still
Temperature Display (HH °C / °F or LL °C / °F)
manuals search engine
DOWN button to tilt up or down.
RIGHT button to pan left or right.
icon will be displayed at the top of the screen.
T
icon will be displayed at the top of the LCD screen.
15