Start-Up; Removing Iso-Strips; Inserting/Changing Batteries - ADE WS 1702 Bedienungsanleitung

Start-up

Removing iso-strips

1. Pull out the battery compartment drawer.
2. Remove the iso-strip.
3. Insert the battery compartment drawer
completely.

Inserting/changing batteries

1. Pull out the battery compartment drawer.
2. Insert a new battery (CR 2025).
The plus pole (+) must point upwards.
3. Insert the battery compartment drawer.
Suggestions for changing the battery:
‚ The batteries must be changed when
nothing is shown on the display.
‚ Only use the battery type specified in the
"Technical Data".
32