Cleaning And Maintenance - Linea 2000 Domo DO362A Gebrauchsanleitung

SLEEP BUTTON
SLEEP
This setting can be used during the night. It will keep a comfortable sleeping temperature and will save
energy. This function can be selected with the "cool" and "auto" setting. The
display Cancel this setting by pressing the "on/off", fan, sleep or mode button.
When pressing the "sleep" button, the selected temperature will be elevated with 1 °C after 30 min. After
another 30 min the temperature will increase with another 1°C. The airco will maintain this temperature
for 7 hours. After this time, the airco will go back to the original set temperature and the "sleep" function
will end.
NOTE : this function can not be selected with the "fan" or "dry" function.
SWING BUTTON
SWING
To adjust the air flow.
LED LED BUTTON
Press this button to turn off all the indicator lights on the display, e.g. when using the device at night.
Press the button again to turn the display back on.

CLEANING AND MAINTENANCE

DRAINING
Permanent drain
During the "dry" mode you can use a permanent drainage.
1. Remove the drain plug and the rubber top.
2. Attach the drain hose on the drain.
3. Make sure the water is drained in a save and permanent way.
Water tank
When you don't use the permanent drain, the non recycled condesation water, will be stored in the water
tank. Make sure that both drainage openings are closed. The appliance is equipped with a technology that
recycles the condensation water, which means that the water tank only needs to be emptied minimally.
· When the water tank is full a few beep signals will be heard and on the display the code P1 will appear.
The "cool" or "dry" mode will end automatically. The fan will continue to operate, this is normal.
· Move the unit over to a place where you can easily drain the water.
· Remove the drain plug at the bottom of your unit and drain the water.
· After fully draining the water tank, place the drain plug back on the drain opening.
· Restart the unit, make sure the error code P1 is no longer displayed. When the code doesn't disappear,
try turning off and on the unit a few times. When the error code continues, please contact the after
sales service.
· NOTE : always make sure to install the drain plug, before turning the unit back on.
56
DO362A
ON/OFF SHORT
CUT
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SLEEP SWING LED
symbol appears on the