KKT KOLBE IND9020RL Bedienungsanleitung Seite 34

Using your Induction hob
If the display flashes
setting - This means that:
• You have not placed a pan on the correct cooking
zone or,
• the pan you're using is not suitable for induction
cooking or,
• the pan is too small or not properly centred on the
cooking zone.
No heating takes place unless there is a suitable pan on
the cooking zone. The display will automatically turn
off after 1 minute if no suitable pan is placed on it.
Safety restrictions for the boost function
!
Basically all cooking zones are capable for the boost feature. However,
the hob is divided into two halves (groups) of of power distribution
technical reasons. Boosting both zones in one group at the same time
is not possibe due to this reason. Here the appliance switches automa-
tically to the hightest possible power level.
A B
34
alternately with the heat
A B
A B A B