Changing Attachments - Beurer Alessandra Ambrosio AHC 41 Gebrauchsanweisung

• Do not wedge any objects between the hot plates [1] and the heating tube and
the clip piece.
• Switch the device off immediately if it is faulty or not working properly.
• Place the multi-functional styler with the support stand [13] folded out on a
stable, horizontal and non-flammable surface, or hold the multi-functional
styler in your hand. Risk of fire!
• Always allow the connected attachment to cool down before changing or
removing it – risk of burns!
Important
• Untangle the mains cable [9] if it is twisted.
• Do not pull, twist or bend the mains cable [9] and do not pull or route it over/
on sharp, pointed objects or hot surfaces.
• Do not trap the mains cable [9] in drawers, doors, between the hot plates [1],
etc. Damaged or tangled mains cables [9] increase the risk of electric shock!

6.1 Changing attachments

> Select the appropriate attachment for the desired hairstyle [12, A, B, C].
> Turn the locking ring [10] to the right to the
symbol . The connected attachment is re-
leased.
> Take the attachment off the handle [6].
> Align the selected attachment as shown in the
image.
> Without tilting the two metal pins, carefully slide
the selected attachment into the handle [6].
> Turn the locking ring [10] to the left to the symbol . The attachment is locked
in place.
> Check that the attachment is firmly secured to the handle [6].
51