Changing The Grid Code - SMA Solar Technology INVERTER MANAGER Installationsanleitung

SMA Solar Technology AG

5.2.4 Changing the Grid Code

igure 20: LCS-Tool - entering the SMA Grid Guard code
To reset the Inverter Manager after the frst
10 operating hours and select a new country data
set, use your SMA Grid Guard code under the user
group Installer (see certifcate "Order form for the
SMA Grid Guard code" at www.SMA-Solar.com).
Procedure:
1. Open the LCS-Tool.
2. Log in as an Installer.
3. Call up the menu Service.
4. Enter your SMA Grid Guard code in the feld
Individual access code under Grid Guard.
5. Select [Save] to save the changes.
☑ A new menu item General is available
under the menu Setup.
Installation Manual
5 LCS-Tool
IMVIOBOX-IA-xx-18 31