Inhaltsverzeichnis
Werbung
24
Downloaded from
www.Manualslib.com
Power LED Header
(3-pin PLED1)
(see p.1, No. 17)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 9)
(SATA3_1:
see p.1, No. 11)
(SATA3_2:
see p.1, No. 13)
(SATA3_3:
see p.1, No. 10)
(SATA3_4:
see p.1, No. 12)
(SATA3_5:
see p.1, No. 14)
Serial ATA Express
Connector
(SATAE_1:
see p.1, No. 15)
USB 2.0 Headers
(9-pin USB_4_5)
(see p.1, No. 21)
(9-pin USB_6_7)
(see p.1, No. 22)
manuals search engine
Please connect the chassis
1
PLED-
power LED to this header
PLED+
PLED+
to indicate the system's
power status.
hese six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
he SATA3_4, SATA3_5
are shared with the SATA
Express connector.
Please connect either
SATA or PCIe storage
devices to this connector.
he SATA Express
connector is shared with
the SATA3_4, SATA3_5
and the M.2_SSD (NGFF)
Socket 3.
*he SATA Express
interface is a combination
of SATAE_1, SATA3_4,
and SATA3_5.
Besides four USB 2.0 ports
USB_PWR
P-
on the I/O panel, there
P+
GND
DUMMY
are two headers on this
motherboard. Each USB
1
GND
2.0 header can support
P+
P-
USB_PWR
two ports.
Werbung
Inhaltsverzeichnis
