Ipad App - Focal ASTRAL 16 Gebrauchsanleitung

ASTRAL 16
U s e r m a n u a l
6. Triggers
Any triggers configured for Manual Switching
(see "Triggers") will have a button available here.
Clicking one of these buttons will toggle the
trigger and therefore the connected device.
7. Temporary Audio Adjustments
Even though you may have meticulously calibrated
the theater in Main Speakers settings, some
material may sound best with slight adjustments.
Adjustments here are temporary and reset to 0
with each change of Preset.
• Center Enhance: Adjust the level of the
center channel between -6 and +6dB in 1dB
increments.
Surround Enhance: Adjust the level of the
•
surround channels between -6 and +6dB in
1dB increments.
Sub Enhance:
• Adjust
subwoofer channels between -6 and +6dB in
1dB increments.
• Bass: Tone control to adjust the bass level in
the entire theater using both the subwoofer
and main channels between -6 and +6dB in
1dB increments.
Treble: Tone control to adjust the treble level
•
in the entire theater between -6 and +6dB in
1dB increments.
Brightness: Tilt the tonal balance of the
•
presentation towards darker timbre (negative
figures) or brighter timbre (positive figures).
• Lipsync: Temporarily adjust lip sync delay to
accommodate some sources. Note that this is
also reset every time a new input is selected,
so if you find yourself regularly setting this to
the same figure, adjust the delay either per
source ("8. AV Delay") or for the entire theater
("Audio/Video General Delay per AV Zone").
8. Zone Control
Within the configuration for each preset, you
may select auxillary zones which may be enabled.
If zones are enabled for the currently selected
preset, you may choose them from the dropdown
menu and individually adjust volume, bass,
treble, mute for each. A/V and Headphone zones
also include a temporary lipsync adjustment. A
secondary input can be selected for the Zone2
auxiliary audio zones (9), different from the Main
Theater input. For each Zone it is possible to then
select either the Secondary Zone2 source or the
source currently playing in the Main Theater.
™
the level of the

iPad App

Apple iPad users can download the app called
Astral 16 from the AppStore and control their
Astral 16 using features identical to those found
in the web UI remote control. Once the app is
downloaded, enter the IP address of the player in
the setup screen and press Connect.
Touch one of the 5 icons at the bottom of the
screen to access features found in the web UI
remote including the Main Theater control as
shown below.
36