Audio/Video General Delay Per Av Zone; System Setup; Front Panel; Ir Function Assignment & Commands - Focal ASTRAL 16 Gebrauchsanleitung

ASTRAL 16
U s e r m a n u a l

Audio/Video General Delay per AV Zone

Set the global lip sync delay for each theater, A/V,
and Headphone zone here. Max value is 250 ms.

System Setup

To control Astral 16 using the iPad Astral 16 App or
Control Systems via TCP/IP, the Network should
remain active at all times. Enable the Network
Standby (On) to allow for such control. Note that
the standby consumption will be higher.
Enable fast boot to substantially decrease power
on time of Astral 16 at the expense of greater
standby power consumption.
Enable the Quiet mode to shift the Fan start up
temperature to a higher threshold so it will not
start at average listening level, but at higher one,
thus they will not be audible in normal condition.
This is useful when the unit is in positionned close
to the listening area. We recommend to turn if Off
when in a technical rack.

Front Panel

Settings that govern behavior of the front panel
screen.
Active Brightness: Brightness of the screen
•
when the screen is actively being used.
Standby Brightness: Brightness of the screen
•
when not actively being used.
• Standby Timeout: Length of time elapsed
between active use of screen and reduction of
brightness to standby level.
Zoom on Changes: When on, changes made
•
via remote control (input, volume, etc.) will
temporarily be shown in a large type so these
changes can easily be read from across the
room.
IR Function Assignment & Commands
Expand Inputs and/or presets to assign up to 6
inputs and 5 presets to discrete buttons on an IR
remote control (RC5/RC6 code required).
Note that many "universal" remotes also have
the ability to cycle through all available inputs
or presets so even if you have more than 6 or 5
respectively setup, they can still be accessed via
IR. Remember that Astral 16 has no front panel
IR receiver, so any IR commands need to be sent
to a module connected to the IR input on the
back panel.
™
Group Command name
POWER ON/OFF
POWER POWER ON
POWER OFF
VOL UP
VOLUME VOL DOWN
AUDIO MUTE
INPUT NEXT
INPUT NEXT
INPUT 1
INPUT 2
MAIN INPUT
INPUT 3
INPUT 4
INPUT 5
INPUT 6
PRESET +
PRESET 1
PRESET 2
PRESET
PRESET 3
PRESET 4
PRESET 5
Dolby Surround
DTS Neural:X
Auro-Matic
PREFERRED
Focal Upmix
UPMIX
Native
Stereo Downmix
32
Sytem Command
16 12
16 29
16 30
16 16
16 17
16 13
16 32
16 33
16 1
16 2
16 3
16 4
16 5
16 6
16 47
16 67
16 68
16 69
16 70
16 71
16 91
16 92
16 93
16 96
16 94
16 95