Swissvoice Avena 248 Bedienungsanleitung Seite 80

Avena 248/248T
- Select Base - Select the desired base station.
- Language - Select the desired display language.
- Auto Answer - Just pick up the handset from the base to answer a call (without
pressing any key).
- Register - Accessory handsets must be registered to the base station (see
chapter "Register new handsets").
- De-register - Select the handset you want to deregister.
- Reset handset
Base station settings
Press Menu, select Settings and press OK.
•
Select BS Settings and press Select.
•
• Select a function from the list using the navigation keys
- Ringer - Select the ringer melody and volume for the base.
- Ring Priority - If several handsets are registered to your base station, all
handsets ring at the same time. You can select a single handset to ring first and
assign the number of rings (2, 4, 6 or 8 rings).
- Dial Mode - Tone: Normal dialling procedure on analog lines. Pulse: May be
required for connecting older telephone systems. Please refer to the relevant
documentation.
- Flash Time - Select the flash time for the analogue network functionalities in
your country (100 ms in Switzerland).
- System PIN - You can modify the PIN code (0000 on delivery).
- PBX Access Code - If you are connected to a PBX, you may need to enter an
access code to allow the public exchange to assign an external line for external
calls.
- Manual ECO Mode - Select the desired ECO Mode range (big/small room).
- Full ECO Mode - When Full ECO Mode is set to ON, the handset's power trans-
mission is regulated and a radiation reduction is achieved when it is near the
base station.
- Reset base
78
Downloaded from www.Manualslib.com manuals search engine
†/π
and press OK.
Avena 248/248T