Transport - Zipper Maschinen ZI-WP700TN Betriebsanleitung

13.3 Transport

Never transport the log saw when it is loaded!
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-WP700TN
N O T I C E
1. Push the log carriage towards the motor until
it touches the limiting stopper.
2. Secure it with the locking plate (see picture
below).
3. Stand behind the unit and tip wheel axle for-
ward to transport it easily.
4. Lift the machine up and use your foot to pull
the axle towards your body so that the saw is
once again in the operation
5. For transport, position the rocker so that the
locking plate can be hooked clockwise onto the
cross strut – see picture on the left.
6. For easier transport the log saw is equipped
with two wheels.
OPERATION
position.
24