Assembly; Mounting The Wheels; Improving Stability; Electrical Connection - Zipper Maschinen ZI-WP700TN Betriebsanleitung

12

ASSEMBLY

The machine is delivered pre-assembled. The wheels supplied must be reassembled as
shown below! Before commissioning, check all screw connections for tightness and tighten
them if necessary.

12.1 Mounting the wheels

12.2 Improving stability

12.3 Electrical connection

 The plug of the power tool must fit into the socket. The plug must not be changed
in any way. Do not use adapter plugs in conjunction with grounded power tools.
Unchanged plugs and suitable sockets reduce the risiko of an electric shock.
 If you use a power tool outdoors, use only extension cables that are also suitable
for outdoor use. Using an extension cable suitable for outdoor use reduces the risk
of electric shock.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-WP700TN
Slide one washer (1), wheel (2) and an-
other washer (3) onto the wheel axle and
secure with a cotter pin (4).
To increase the stability, the machine can
be fixed to the floor. (The screws re-
quired for this are not included in the
scope of delivery, however!)
ASSEMBLY
21