Switching Off - Zipper Maschinen ZI-EBM40V-AKKU Betriebsanleitung

Switching on :
 Activate the machine an put the ON-OFF-Switch (1)
into Position (I)
 First press and hold the interlock button (2).
 Then press the activation lever (3).

Switching off:

 Release the activation lever (3) or turn the ON-OFF
switch (1) to position (0). Release the On/Off switch.
Battery state of charge:
 Press the button on the battery to check the state of
charge at the state of charge indicator LEDs.
The indicator goes out after 5 seconds.
If one of the LEDs flashes, the battery must be
recharged. If none of the LEDs light up after the button
is pressed, the battery is faulty and must be replaced.
 The machine is delivered pre-assembled, only the drill / mixer must be fitted before operation.
 If the rotating parts (drill / mixer) are mounted incorrectly, it can lead to serious accidents!
Check before starting work the correct mounting of the drill.
 Mount the drill / mixer only with the supplied connecting bolt.
 Drill deeper holes within 2-3 working steps!
 Is the ground with many roots and / or stones keep extreme caution: Be especially careful that
you do not meet an unexpected blocking of the drill by jamming in a root or a large stone
unprepared.
 Remove loose objects lying around in the immediate working area. They might be winded up
by the rotating drill and block it.
 Take a safe position and hold the machine firmly on both handles.
 Put the tip of the drill on the ground and start the process carefully.
 Drill holes without exerting too much body weight on the auger. Allow the auger to advance by
its own weight.
14 MAINTENANCE
Remove the battery before carrying out maintenance work on the machine! This
prevents damage to property and serious injuries due to unintentional switching
on of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is
a pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!.
Check regularly the condition of the security stickers. Replace them if required.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-EBM40V-AKKU
W O R K I N S T R U C T I O N S
WARNING
NOTICE
MAINTENANCE
20