Work Area Safety; Electrical Safety; Personal Safety - Powers Fasteners F16 Betriebsanleitung

BradNailer F16 Op Man_NEW.qxd
MODEL F16 MODEL F16
The undersigned is responsible for compilation of the technical file
and makes this declaration on behalf of Powers.
10. March 2008
Powers Fasteners Europe BV
P. Geuvers
Managing Director
POWERS FASTENERS EUROPE B.V.
WESTRAK 208
1771 SV WIERINGERWERF
THE NETHERLANDS
TEL: +31 (0) 888-POWERS (769 377)
FAX: +31 (0)227-594 759
E-MAIL: info@powerseurope.nl
www.powerseurope.nl
POWERS FASTENERS AUSTRALASIA PTY LTD
HEAD OFFICE
FACTORY 3/205 ABBOTS ROAD
DANDENONG SOUTH VICTORIA 3175
TEL: +61 (03) 8787-5888
EMAIL: info@powers.com.au
www.powers.com.au
10
Downloaded from www.Manualslib.com
18/8/08
manuals search engine
1:39 PM Page 10
WARNING: To reduce the risk of injury, read the
instruction manual.
General power tool safety warnings
WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings
and instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in all of the warnings listed below
refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.

1 WORK AREA SAFETY

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.

2 ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of
electric shock.

3 PERSONAL SAFETY

a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power