Emptying The Dust Chamber; Inserting The Filter Unit - Kobold VC100 Gebrauchsanleitung

16
Bild 4.10 Emptying the dust chamber
2
5a
Bild 4.11 Inserting the filter unit
Downloaded from www.Manualslib.com
Maintenance
4.2
• Remove the filter unit (see section 4.1 on page 15).
• Empty the contents of the dust chamber
• Where required, clean the dust chamber with a damp cloth and allow the dust
chamber to dry completely before assembly.
4.3
• When inserting the filter unit
1
unit points towards the release key
• Keep the release key pressed down and push the filter up to the stop in the
dust chamber.
5
manuals search engine

Emptying the dust chamber

Inserting the filter unit
5
ensure that the larger tray
1
into a bin.
of the filter
5a
2 1
on the dust chamber .