Vitalmaxx CF-2606H Gebrauchsanleitung Seite 15

3. Connect the desired mains cable with the jack on the device and insert the mains plug in an
easily accessible socket and / or in the cigarette lighter (when using the car adapter).
4. If you are using the device for the first time, lay a towel over the rest (if necessary) in order
to reduce the intensity of the massage.
5. Sit down on the massage seat and lean back.
6. Pick up the remote control and push the POWER button. By pushing the buttons on the
remote control, you can make the following settings:
2
3
4
7.
You can deposit the remote control in the pocket on the side of the device during the
massage.
8. The device automatically deactivates after 15 minutes of continuous operation. Allow it to
cool off if the heating function was on.
9. Disconnect the mains plug and remove the cord from the device.
10. Fold the massage seat up and store all parts in the packaging. Store the device in a dry area
that is not accessible to children.
02591_DE-GB-FR-NL_V1.indb 15
Downloaded from www.Manualslib.com
1
4a
4b
4c
manuals search engine
1 POWER Turn the device on and off
If you turn the device off when the massage rollers
are not in their starting position at the bottom of the
back rest, the POWER LED will blink and the rollers
will automatically retract. Only once the rollers have
reached their starting position will the device turn off.
2 HEIZUnG (heat) Turn the heat function on and off
3 VIBRAtIOn With this button, you turn the vibration
points in the seat on and off and switch between the
intensity levels high (H), medium (M) and low (L).
4 MASSAGE Push this button once at the beginning of
use to activate the massage functions. The device begins
with the GAnZER RÜcKEn (full back) function.
4a GAnZER RÜcKEn (full back) The massage
rollers run up and down the entire length of the
back.
4b OBERER RÜcKEn (upper back) Massage
rollers run up and down the middle and upper
part of your back.
4c UntERER RÜcKEn (lower back) The
massage rollers will run up and down the middle
and lower back.
By pressing the function buttons, you select the different
functions. The LEDs next to the function keys indicate
which function is currently active. To deactivate a
function, push the corresponding button. With the
MASSAGE button , you can deactivate the massage
functions.
15
08.01.13 10:54