Teka HPS-735 Bedienungsanleitung Seite 29

3172755-000 EPIFA 26/05/14 09:30 Página 29
The control dial is in position
and the door is still locked.
The control dial is in position
, the oven is cold and the
door is still locked.
I have turned the control dial to
position
is lit up, the
flashing on the timer display
and there is a beep every 5
seconds.
Downloaded from www.Manualslib.com
INCIDENT
The oven has not cooled down
to the safe temperature.
You have not followed the
instructions to cancel the
operation correctly.
You have not selected one of
. The pilot light the programmes (P1, P2 or P3).
symbol is
manuals search engine
CAUSE
Wait until the temperature
lowers and pilot light
off.
1. Turn the control dial to
position
minute.
2. Turn the control dial to
position
minute.
3. Turn the control dial to
position
until pilot light
Press
of the programmes (P1, P2 or
P3) to start the pyrolytic cycle.
SOLUTION
turns
and wait for 1
and wait for 1
again and wait
turns off.
or to choose one
29