Door Reversibility - AEG S73400CTS1 Benutzerinformation

46 www.aeg.com
Downloaded from www.Manualslib.com
4
8.5 Levelling
When placing the appliance ensure that
it stands level. This can be achieved by
two adjustable feet at the bottom in
front.
8.6 Removing the shelf
holders
Your appliance is equipped with shelf re-
tainers that make it possible to secure
the shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direc-
tion of the arrow (A).
2. Raise the shelf from the rear and
push it forward until it is freed (B).
3.
Remove the retainers (C).
manuals search engine
2
1
3

8.7 Door reversibility

• Remove the spacer (A) and move to
the other side of the hinge pivot (B).
• Remove the doors.
• Remove the left-hand cover pin of the
middle hinge (C,D) and move to the
other side.
• Fit the pin of the middle hinge (B) into
the left-hand hole of the lower door.
• Remove using a tool the cover (A). Un-
screw the lower hinge pivot (B) and
A
B
C
WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the
doors of the appliance during
the operations.
A
B
E
F
C D