Panasonic CZ-RD514C Bedienungsanleitung Seite 3

DAILY TIMER SETTING DAILY TIMER SETTING
• To turn ON or OFF the unit at a preset time.
TIMER/CLOCK
MODE UP SELECT
OFF/ON DOWN SET
CLOCK CANCEL
2 Select ON or
OFF timer
• To cancel ON or OFF timer, press
• Timer operation is based on the clock set in the
remote control and repeats daily once set.
• The timer closest to the current time will be activated
fi rst.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting by pressing
WEEKLY TIMER SETTING WEEKLY TIMER SETTING
• Daily timer and weekly timer could not be set at the
same time.
• Promotes energy saving by allowing you to set up to
6 programs in any given day.
1. Press Timer
weekly timer.
2. Press Timer
SELECT
3. Press
4. "1" will be blinking, press
5. Press Timer
6. Press Timer
If you want to set the timer together with your desired
temperature, press
SET
7. Press to confi rm program 1. The selected day will
be highlighted with
• After 2 seconds, the display will move to the next
program. Repeat steps 4 to 7 to set programs 2 to 6.
• Same timer program cannot be set in the same day.
• During timer setup, if no button is pressed within 30
seconds, or if the
that moment is confi rmed and timer setup is ended.
Downloaded from www.Manualslib.com
1 • Press once to change the
display from Clock to Timer
or vice-versa.
• Press for more than 4
seconds to change the
display from Daily Timer to
Weekly Timer or vice-versa.
3 Set the time
4 Confi rm
CANCEL
.
MODE
for 4 seconds to change display to
UP DOWN
or to select your desired day.
to confi rm your selection.
SELECT
to set program 1.
OFF/ON
to select ON or OFF timer.
UP DOWN
or to select your desired time.
to select the temperature.
TEMP
.
SET
button is pressed, the setting at
manuals search engine
OPERATION DETAILS OPERATION DETAILS
The timer setting will shown at wired remote control
only but not at indoor unit's TIMER indicator.
Check Current Timer Program
Perform the step below to check the timer program for
a particular day.
1. Press Timer
SELECT
2. Press to enter day setting.
3. Press Timer
shown, press
4. Press Timer
Modify Current Timer Program or Add New Timer
Program
1. Press Timer
SET
.
SELECT
2. Press to enter day setting.
3. Press Timer
shown.
4. Perform steps 4 to 7 of "WEEKLY TIMER SETTING"
to modify existing timer program, or add any timer
program.
Cancel Current Timer Program
Perform the step below to cancel the timer program for
a particular day.
SELECT
1. Press to enter day.
2. Press Timer
shown.
SELECT
3. Press to enter program setting.
4. Press Timer
shown.
CANCEL
Press
disappear.
Disable & Enable Weekly Timer
• To disable weekly timer setting, press
CANCEL
press .
• To enable previous weekly timer setting, press
SET
then press
• When wired remote control is installed ECONAVI,
AUTO COMFORT, MILD DRY operation setting
from wireless remote control might be disabled.
But POWERFUL, QUIET, PATROL, e-ion operation
setting could be operate according to wireless remote
control.
• When wired remote control is in operation, the timer
setting from wireless remote control will be cancelled.
MODE
to enter timer mode.
UP DOWN
or until your desired day is
SELECT
to confi rm your selection.
UP DOWN
or to check the set programs.
MODE
to enter timer mode.
UP DOWN
or until your desired day is
UP DOWN
or until your desired day is
UP DOWN
or until your desired program is
to cancel the program, will
MODE
.
NOTE NOTE
, then
MODE
,
3