Wired Remote Control - Panasonic CZ-RD514C Bedienungsanleitung

WIRED REMOTE CONTROL

a
TIMER/CLOCK
MODE
OFF/ON
CLOCK
c
b 6
Remote Control Display
a OPERATION LED
b OFF INDICATOR
c OPERATION MODE SELECTION INDICATOR
d TIMER/CLOCK SETTING DISPLAY
Lights up if Timer operation is selected
ON Timer. To automatically switch "ON" the unit.
Day to be selected
e FAN SPEED DISPLAY
f TEMPERATURE SETTING DISPLAY
g ERROR CODE DISPLAY
Remote Control Preparation
CLOCK
1. Press
UP
2. Press
SET
3. Press
4. Repeat steps 2 and 3 to set the current time.
2
Downloaded from www.Manualslib.com
OFF / ON
UP SELECT
FAN SPEED MODE
TEMP
DOWN SET
AIR
CANCEL
SWING
RESET
CHECK
AC RC
7 10 9 8
6 different programs can
be set in a day (1 ~ 6)
Indicates the selected day
Indicates the next timer
operation day
Time to be selected
(10 minutes step)
OFF Timer. To automatically switch
"OFF" the unit.
DOWN
or to select current day.
to confi rm.
manuals search engine
Press the remote control's button
d
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
e
improperly.
f
2
TO SET TEMPERATURE
g
• Selection range: 16˚C ~ 30˚C.
1
3
TO SELECT OPERATION MODE
4
AUTO mode - For your convenience
3
• Unit selects operation mode during startup according to
2
temperature setting and room temperature.
HEAT mode - To enjoy warm air
5
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4
TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5
TO ADJUST AIRFLOW DIRECTION
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fi x at
predetermined position. The vertical louver swing left/right
after the temperature rises.
• For Hide-Away models, AIR SWING buttons are not in
use. Airfl ow direction can not be adjusted.
Press and hold for approximately 10 seconds to
6
show temperature setting in °C or °F.
Press and hold for 5 seconds to dim or restore the
7
unit's indicator brightness.
Press to restore the remote control's default setting.
8
9 Not used in normal operations.
10 Retrieve error code.
• During operation, the unit stops and both a and b is
OFF indicates abnormality occurs.
1. Ensure a is OFF, press
2. Press or
identifi ed, a will be ON continuously, then write down
the error code.
3. Press for 5 seconds to quit checking.
CHECK
4. Turn the unit off and reveal the error code to authorized
dealer.
for 5 seconds.
CHECK
. If error code and abnormality can be