Cochlear Osia 2 Klinische Kurzanleitung Seite 5

•
To remove a magnet
•
Place the magnet tool over the magnet.
3
•
Turn counter-clockwise to loosen the magnet.
4
Lift the magnet and pull out.
5
WARNING: Changing to a stronger magnet may cause a sensation
of pressure or skin irritation. To relieve this you can attach a Cochlear
SoftWear Pad to the back of the sound processor. See the Osia 2
Sound Processor User Manual for details.
Changing the cover
•
To remove the cover
•
Open the battery door.
1
Press and lift to remove the cover.
2
•
To attach the cover
Place the cover over the upper part of the sound processor base unit. The
3
•
button should be visible through the cover opening.
•
Press down on the cover around the button until a "click" is heard.
4
•
Press down on the cover between microphone ports until a "click" is heard.
5
Close the battery door.
6
NOTE: Double check no gaps are present between the cover and the
base.
Attaching a Cochlear SoftWear Pad
NOTE: The Cochlear SoftWear Pad is optional.
If the patient experiences discomfort when wearing the processor, they can
attach this adhesive pad to the back of the processor.
NOTE: A stronger magnet might be needed after attaching a
•
Cochlear SoftWear Pad.
•
Peel off the single backing strip on the adhesive side of the pad.
1
•
Attach the pad to the back of the processor – press down firmly.
2
Peel off the two semicircle backing covers on the cushion side of the pad.
3
3 4
5
1 2
4
"Click" 5 "Click"
3 6
1 2
3
English
5