Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
O
UTPUT
Adjust the values of each parameter using the up/down VALUE arrows.
O
UTPUT
used to insure that low-frequency energy is not accidently routed to the mid-range or tweeter drivers that may result
in potential damage. Available Dx46 crossover parameters are Type and Frequency.
The Dx46 Crossover offers a variety of Hipass and Lopass filters depending on the configuration output selected
along with a variety of selectable filters and frequency ranges that are adjustable using the up/down VALUE arrows.
Downloaded from
www.Manualslib.com
P
EQ (PEQ)
ARAMETRIC
Pressing the PEQ button places the current preset in Edit mode and jumps the LCD screen to a pre-se-
lected parametric EQ (bands 1-6). Subsequent button presses advances the display to the next output
channel (OUT1 to OUT6). Use the <SELECT > buttons to navigate between the PARA EQ BAND (1-6),
Type, Frequency, Q and Gain parameters.
OUT 1:PEQ1
Type: PEQ
Q: 0.7
Filter type
Frequency
Loshelv
Hishelv
PEQ
20 to 20000 Hz
Lopass
Hipass
Allpass
X-OVER
The Dx46's crossover is an advanced frequency division process that is accomplished by applying a va-
riety of high-pass and low-pass filters to a predetermined set of crossover points. Speaker systems are
generally made up of several drivers that are dedicated to a specific range of frequencies that result in
the efficient reproduction of the audio spectrum and a smooth sound. The Dx46 crossover routes fre-
quencies to the appropriate drivers to accurately reproduce sound. The crossover network can also be
To access the Crossover screen, press the X-Over button. Subsequent button presses will toggle the dis-
play between OUT1 to OUT6. Use the Value Up and Down buttons to navigate between the X-Over Hi-
pass, X-Over Lopass, X-Over Delay and FIR Filter screens.
OUT 1:X-Over Hipass
Type:12dB Butterworth
Trim:3.0dB
Parameter
Description
Type
Type offers list of selectable slopes/response Q's
• Thru
• 6dB
• 12dB, Q = 0.5 to 2.0
• Bessel: 12 dB, 18 dB or 24 dB
• Butterworth: 12dB, 18dB or 24 dB
• Linkwitz-Riley: 12dB or 24 dB
Frequency
Frequency offers a selectable frequency range from 20 to 20000 Hz.
Trim
The amount of boost or cut
manuals search engine
F:30.0Hz
Gain: 1.0dB
Slope / Order
Resp / Q
6dB/oct.
12dB/oct.
6dB/oct.
12dB/oct.
-
0.40 to 40
6dB/oct.
12dB/oct.
0.4 to 2.0
1
2
0.4 to 2.0
Table 5-12: Parametric EQ
F:80.0Hz
Table 5-13: Crossover parameters
Active
Gain
-
-12.0 to +18.0 dB
-
-
-
-
-
-
D
46
X
35
Werbung
Inhaltsverzeichnis
