Electro-Voice Dx46 Bedienungsanleitung Seite 15

14 – USER D
Pressing the USER Delay button places the current preset in Edit mode and jumps to the User Delay screen. Sub-
sequent button presses toggle the display between Input A and Input B.
15 – USER A
Pressing the Array button places the current preset in Edit mode and jumps to the first Array screen. Subsequent
button presses step through the available output channels (depending on configuration).
16 – SPEAKER PEQ
Pressing the PEQ button places the current preset in Edit mode and jumps to the first SPEAKER Parametric Equal-
izer screen. Subsequent button presses step through the available output channels (depending on configuration).
1 7 – SPEAKER X-O
Pressing the SPEAKER X-Over button places the current preset in Edit mode and jumps to the first Output Channel
Cross-Over screen. Subsequent button presses step through the available output channels (depending on config-
uration).
18 – SPEAKER D
Pressing the Delay button places the current preset in Edit mode and jumps to the SPEAKER Delay screen. Sub-
sequent button presses step through the available output channels (depending on configuration).
19 – SPEAKER L
Pressing the Level button places the current preset in Edit mode and jumps to the SPEAKER Level screen. Subse-
quent button presses step through the available output channels (depending on configuration).
Press and hold the SPEAKER Level button for 4 seconds to open the Limiter screen. Subsequent button presses
step through the available output channels (depending on configuration).
20 – O
Each output channel has an eight-segment output level VU meter. Meter response characteristics can be selected
in the Setup menu:
• Normal Fast,
• Peak-Hold,
• Slow Decay.
The yellow segment indicates that there is no headroom left to the selected VU reference i.E. D/A Converter Clip or
Limiter Threshold. The red segments indicates clipping within the output signal path and should be avoided by ad-
justing the Output Level of the output channel. It is important to understand how the meters work and what they are
displaying. The Output Meters are displayed as "dB to Limiter Threshold" or „dB to D/A clip". In other words, these
meters will display the headroom between the output level and the limiter threshold or clip threshold of the D/A con-
verter. When viewed in conjunction with the Gain Reduction meters, this provides a complete display of level and
headroom before and after limiting has been engaged to allow system levels to be optimized. This also means that
the output metering will be displayed differently depending on the limiter threshold setting.
21 – O
Each output channel has a four-segment gain reduction meter that shows the effect of the output channel Limiter
on output signal; from -3dB to -12dB.
Downloaded from www.Manualslib.com
ELAY BUTTON
RRAY BUTTON
BUTTON
VER BUTTON
ELAY BUTTON
EVEL BUTTON
L
UTPUT EVEL METERS
G R
UTPUT AIN EDUCTION METERS
manuals search engine
D 46
X
15