Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E
-V
LECTRO
OICE
Setting the correct Delay value is important to avoid acoustic cancellation of signals. E.g. when using the two full-
range channels of the configuration "2way + FR" as delay lines, the Delay of this two channels has to be adjusted
according to the distance to the main PA.
If all connected speakers are used as a delay line, or the main PA should be moved acoustically „back to the stage",
the input delay parameter of input channels A and/or B should be used in this cases. Press the USER Delay button
to use the input delay, up to 2 seconds of delay are available for each input.
C
ONFIGURE
Use the GEQ (31 band) and PEQ (10 band) of each input channel for adjusting the sound of your system to your
room characteristics. Press the USER PEQ or GEQ button to open the equalizer dialogs.
12
Downloaded from
www.Manualslib.com
OUT 1:Output Delay
Delay: 7.0
Unit: ms
E
QUALIZER
IN A:PEQ1
Type: Hipass
Slope: 12dB/oct
IN A:GEQ
F:20Hz
Type: Symmetric Q
manuals search engine
Active
Active
F: 20000.0Hz
Q: 2.0
Detail
Gain:0.0dB
Active
Q: 4.3
Werbung
Inhaltsverzeichnis
