Electro-Voice Dx46 Bedienungsanleitung Seite 14

E -V
LECTRO OICE
• Store – Select User Preset destinations forwards/backwards to select a destination for the currently edited preset, scroll for-
wards through ANSI character set to name preset.
• Edit / Setup – Scroll forwards/backwards through Edit / Setup screens when the top line of the LCD screen is active. Scroll for-
wards through values for the selected parameter in an Edit / Setup screen.
6 – E
DIT
Pressing the Edit button while in Run mode places the current preset in Edit mode and the Edit button lights. The
LCD display shows the last edit screen that was selected. From this point, any edit screen can be displayed and
altered. Pressing the Edit button again "compares" the edited preset, if parameters have been altered, to the original
un-edited preset. This compare function will audibly switch between the altered parameters and the previously
stored settings, allowing you to hear the effect of any DSP changes that have been made. Use this feature to monitor
progress in editing or creating presets. Subsequently recalling a new preset will prompt you to save changes, which
you may do or not.
7 – S
ETUP BUTTON
Pressing the Setup button while in Run mode displays the Setup menus in the LCD display and the Setup button
lights. In this mode, any Setup menu can be displayed and altered. Changes made to Setup menu items are saved
automatically. To exit Setup mode, press the Setup button again. The LCD display will revert to Run mode.
8 – SELECT <
The SELECT < button is pressed to navigate backwards through Edit, Setup and / or Recall menu displayed. The
button cycles through all available value fields in a screen and wraps around from first to last.
9 – SELECT >
The SELECT > button is pressed to navigate forwards through Edit, Setup and / or Recall menu displayed. The
button cycles through all available value fields in a screen and wraps around from last to first.
10 – S
TORE BUTTON
Pressing the Store button while in Run mode displays the Store Preset screen in the LCD display and the Store
button lights. In this screen edited presets can be named and saved to a user preset location. Pressing the Store
button again completes the preset save operation. To exit without storing the current preset, press the Edit or Setup
buttons to return to the Run mode screen.
1 1 – R
ECALL BUTTON
Pressing the Recall button while in Run mode displays the Recall Preset screen in the LCD display and the Recall
button lights. In this screen, any of the 60 factory and 30 user presets can be recalled into current memory. Pressing
the Recall button again completes the preset load operation and returns the LCD display to Run mode. To exit with-
out storing the current preset, press the Edit or Setup buttons to return to the Run mode screen.
1 2 – USER PEQ
Pressing the USER PEQ button places the current preset in Edit mode and jumps to the first screen of the para-
metric User Equalizer. Subsequent button presses toggle the display between Input A and Input B.
13 – USER GEQ
Pressing the USER GEQ button places the current preset in Edit mode and jumps to the first screen of the graphic
User Equalizer. Subsequent button presses toggle the display between Input A and Input B.
14
Downloaded from www.Manualslib.com
/ COMPARE
BUTTONS
BUTTON
BUTTON
BUTTON
BUTTON
manuals search engine