Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CAUTION: The parameter settings of the Dx46 factory presets are highly optimized and should not be
The following steps are shown for one output channel only.
C
ONFIGURE
Press the Level button to open the Level/Amp dialog.
The Level parameter allows adjustment of the level ratio between sub and top speakers. E.g. if the parameters in a
preset are optimized for 2 subs you can increase the sub level by 6 dB if you are using 1 sub in your application. As
an alternative you can decrease the top level by 6 dB.
S
ELECT AMPLIFIER TYPE
Select the power amp type connected to the Dx46 using the parameter Amp. Please note there are multiple entries
for an amplifier type if the amplifier allows different sensitivity settings.
If the amplifier type connected to the Dx46 is not included in the list, select the entry User. In this case you have to
adjust the parameter Gain manually. Check the technical specification of your amplifier for the gain value.
If the correct gain value is unknown set the parameter Amp to Default. For this setting a gain of 39dB is used, this
is sufficient for most amplifiers. By selecting the right amplifier type the limiter settings of the channel are adapted
automatically, so the connected speakers are protected as required.
Ensure the level of the amplifier is set to 0dB to get the maximum power from the amps.
C
ONFIGURE
The Dx46 can be used to compensate for the positioning of cabinets or speaker arrays relative to each other or the
original sound source.
Press the SPEAKER Delay button for adjusting one or more output channels and select Active in this dialog.
Select the prefered Unit (using cm as unit is recommended) and edit the setting of the parameter Delay.
Downloaded from
www.Manualslib.com
Illustration 2-1: Output assignment LEDs
changed. Especially editing the X-Over, PEQ or Limiter settings can result in damaged
speakers.
L
EVEL
OUT 1:Level/Limiter
Level: 6.0dB
Amp: User
OUT 1:Level/Limiter
Level: 6.0dB
Amp: TG-7 (0 dBu)
OUT 1:Level/Limiter
Level: 6.0dB
Amp: User
D
ELAY
manuals search engine
Polarity:Inv
Gain: 39dB
Polarity:Inv
Polarity:Inv
Gain: 39dB
D
46
X
11
Werbung
Inhaltsverzeichnis
