Childproof Lock; Deactivating The Childproof Lock; Basic Settings; Overview Of The Basic Settings - Junker JC4119960 Gebrauchsanleitung

Changing the cooking time
Use the settings area to change the cooking time.
▶
a After a few seconds, the display shows the changed
cooking time.
a You will see the cooking time counting down.
Clearing the cooking time
If the timer function has been set, press
1.
Use the settings area to set the cooking time to ⁠ ⁠ :
2.
⁠ ⁠ .
a After a few seconds, the cooking time is cleared.
The appliance does not interrupt operation.
10.4 Timer
You can specify for a signal to sound after a certain
period of time. The maximum duration of the timer is
24 hours.
The timer works independently of the operation and
other time-setting options. The timer signal is different
to the other signals the appliance sounds.
Setting the timer
Press until is in focus.
1.
11

Childproof lock

You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
11.1 Activating the childproof lock
Requirement: The appliance is switched off.
Press and hold for approx. 4 seconds.
▶
a The control panel is locked.
a The symbol appears in the display.
12

Basic settings

You can configure the appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
1
Factory setting (may vary according to model)
⁠ .
Basic setting
Signal duration
Button tone
Display brightness
Time indicator
Use the settings area to set the required timer dura-
2.
tion.
a After a few seconds, the appliance displays the set
timer duration.
a The timer starts.
lights up in the display.
a
a You will see the timer duration counting down.
Ending the timer
Requirement: A signal sounds. ⁠ ⁠ :
display.
Press any symbol.
▶
a The timer is switched off.
Changing the timer
Use the settings area to change the required timer
▶
duration.
a After a few seconds, the appliance displays the set
timer duration.
Cancelling the timer
Use the settings area to set the timer duration to
▶
⁠ ⁠ .
a The timer is switched off.
a If a timer duration has been set, this continues to
count down. While the childproof lock is active, the
timer duration cannot be changed. Signal tones,
e.g. when the timer duration has elapsed, can be
ended by pressing any button
11.2 Deactivating the childproof lock
Press and hold
▶
a The control panel is unlocked.
Selection
= short = 10 seconds
= medium = 30 seconds
= long = 2 minutes
= off
1
= on
= low
1
= medium
= high
= off
1
= on
Childproof lock en
is shown in the
for approx. 4 seconds.
Description
Signal duration after a
1
cooking time has elapsed
or the timer is set.
Switch the button tones on
or off.
Set the brightness of the
display.
Show the clock time in the
display.
:
51