Modbus Register - green motion PRIVATE ONE 3.7 kW Technische Dokumentation

PRIVATE ONE – TECHNISCHE DOKUMENTATION
5.3

Modbus Register

The charging station can be controlled with access via Holding registers. The protocol and registers
specification are showed in the next table.
The "always/optional" column is used to indicate whether the register must absolutely be implemented
by the slave charging station or if it's optional.
Register Address
40001 00
40002 01
40003 02
40004 03
40005 04
40006 05
40007 06
40008 07
Always or R/W Description
Optional
Always R Plug Count: Number of plugs connected to the controller
Always R/W Selected Plug Index: index of the plug between 0 and (Plug
Count – 1)
Always R Plug Id: ID of the plug, Plug ID is different from Plug Index. It
identifies the plug on the network
Always R/W Enabled :
0 = No, the charger does not allow to charge the vehicle
1 = Yes, the charger can charge the vehicle
Reserved
Always R/W Status :
0 = Free
1 = Charging
2 = VehicleNotConnected
3 = VehicleWait
4 = VehicleNoFan
5 = BreakerDown
6 = ChargingError
7 = Paused
8 = DoorOpened
9 = Starting
10 = SessionTimeout
11 = OutOfCredit
12 = LockError
13 = OverCurrentError
14 = Booked
15 = NotResponding
Always R Charge Status :
0 = Unknown,
1 = WaitEnabled,
2 = Mode1_On,
3 = Mode1_LockError,
4 = Mode3_A,
5 = Mode3_B_no_pwm,
6 = Mode3_B_pwm,
7 = Mode3_C,
8 = Mode3_D,
Page 20