Opening And Closing The Quick-Release Axle On The Seat Post Clamp - Ghost E-HYBRIDE Andasol 4 Man Originalbetriebsanleitug



7. Check that the wheels are securely fitted as described in section 6.1.1.
8.4.2
Original operating instructions 11/2014
Downloaded from www.Manualslib.com
GHOST EPAC
6. Testing the adjustment of the quick-release lever:
If the quick-release lever does not close tightly enough:
WARNING Danger from falls and accidents
If the lever is too loose when closed, the front wheel may become loose and
move its position. This can lead to dangerous riding situations, falls and
accidents.
– Open the quick-release lever.
– Tighten the nut slightly in a clockwise direction.
– Close the quick-release lever.
If the quick-release lever closes too tightly:
WARNING Danger from falls and accidents
If the lever cannot move in its final position (90° to the hub axle) because
the pre-tension is too great, it is possible that the lever will become loose
of its own accord while you are riding the bicycle, so that the front wheel
also becomes loose. This can lead to dangerous riding situations, falls and
accidents.
- Open the quick-release lever.
- Loosen the nut slightly in an anticlockwise direction.
- Close the quick-release lever.

Opening and closing the quick-release axle on the seat post clamp

1 Axle 2 Knurled nut
NOTE:
Opening and closing the quick-release axle on the seat post clamping device is
carried out in the same way as opening and closing the quick-release axle on the
front wheel, see section 8.4.1 . Opening, closing the quick-release axles .
manuals search engine
E - H Y B R I D E A N DA S O L & A N DA S O L X
E - H Y B R I D E T E R U & T E R U F S
3 Lever
EN
133