Checking The Suspension Fork (If Present); Inspecting The Brakes - Ghost E-HYBRIDE Andasol 4 Man Originalbetriebsanleitug

EN
6.6
6.7

118
Downloaded from www.Manualslib.com
GHOST EPAC
5. Turn the handlebars with the front wheel several times to the left and right.
It must be possible to steer the front wheel easily in both directions
without any play.
The handlebars must not lock in any position.
6. If the check reveals any faults:
Contact your specialist bicycle dealer.

Checking the Suspension Fork (if present)

1. Apply the front wheel brake and keep the brake applied.
2. Press with your body weight onto the handlebars so that the spring fork
is compressed.
3. The fork must move easily up and down.
4. No cracking or grinding noises should be heard.
5. Grip the front wheel between your legs and try to pull up the EPAC
by the handlebars.
6. The standing tubes must not be released from the fork tubes
or from the crown.

Inspecting the brakes

WARNING Danger from heavy falls
Failing brakes always result in dangerous riding situations,
falls and accidents.
A brake malfunction is a serious danger to safety.
Pay particular attention when checking your brake system.
Under no circumstances should you continue using your EPAC if it has
any defects. Contact your specialist workshop immediately if you
discover any defects and the requirements specified in sections 6.7.1
and 6.7.2 are not met.
NOTE:
During prolonged tours over several days the brake disc and brake pads can become
severely worn.
You should plan tours lasting several days in such a way that you can have any
necessary servicing work carried out at specialist workshops.
As a precaution you should carry brake linings for your brakes with you.
If you do this you will avoid having to break off your tour if the specialist
workshop does not have your type of brake linings currently in stock.
manuals search engine
E - H Y B R I D E A N DA S O L & A N DA S O L X
E - H Y B R I D E T E R U & T E R U F S
Original operating instructions 11/2014