Inspecting The Handlebar Attachments; Inspecting The Headset - Ghost E-HYBRIDE Andasol 4 Man Originalbetriebsanleitug

6.4
6.5
Original operating instructions 11/2014
Downloaded from www.Manualslib.com
GHOST EPAC

Inspecting the handlebar attachments

How to check the attachment of the gear lever, brake levers and grips:
1. Grip the front wheel firmly between your legs or hold the handlebars tightly
with one hand.
2. Try to turn the brake levers with your other hand.
3. Try to turn the gear lever with your other hand.
4. If your EPAC has been retrofitted with a bell, try to twist this
with light hand pressure.
It must not be possible to move or twist any of the parts.
No cracking or grinding noises should be heard.

Inspecting the headset

The headset is the mounting of the handlebar stem in the fork column. Via this
mounting, steering movements are transmitted to the front fork.
1. Check your headset. It must be possible to steer the front wheel easily
in both directions without backlash.
2. Stand alongside your EPAC and hold the handlebar grips
with both hands.
3. Apply the front wheel brake and keep the brake applied.
4. Push your EPAC forward and back with short, jerky movements.
The headset must not exhibit any play.
No cracking must be heard or felt.
No crunching noise may be heard.
manuals search engine
E - H Y B R I D E A N DA S O L & A N DA S O L X
E - H Y B R I D E T E R U & T E R U F S
EN
117