Simons Voss Technologies PinCode-Tastatur Kurzanleitung Seite 38

8. Battery replacement
NOTE
Do not touch the contacts on the new batteries with your hands when
replacing the old ones. Use cotton gloves free of fat or grease.
1. Unscrew the two screws in the bottom of the housing completely.
2. Remove the front of the housing.
3. Using a screwdriver, slide one side of the battery brackets into the
IMPORTANT
The spring tension of the clamps causes the clamps to jump out.
The clamps are under tension. They can jump out and get lost when
you release them.
4. Remove the battery.
38 / 156
designated opening.
PinCode-Tastatur (online)
EN