Troubleshooting
Warnhinweise
Troubleshooting
Problem
Drive is not
functioning.
Drive is not
functioning.
Transmission control 2. Batteries are inserted 2. Remove batteries
light is not
illuminated.
Drive is not
functioning.
Transmission control
light is illuminated.
Astro programme
doesn't function
properly.
The AstroTec-868
does not carry out the is set to "MAN ".
switching commands.
The AstroTec-868
does not carry
out the switching
commands precisely.
Cause
Faulty connection.
1. Batteries are low.
1. Receiver is outside
the radio operating
range.
2. Transmitter has not
been programmed
into the receiver.
1. Date is incorrect.
2. Wrong city or wrong 2. Set correct city
latitude/
longitude setting.
3. Holiday function is
switched on.
4. Astro shift is set.
The sliding switch
Holiday function is
switched on.
Remedy
Check the connection.
1. Replace batteries.
and re-insert
correctly.
1. Reduce the distance
to the receiver.
2. Programme the
transmitter.
1. Set correct date.
or exact degrees
latitude/longitude.
3. Switch holiday
function off.
4. Adjust astro shift.
Move the sliding
switch to "AUTO
Switch holiday
function off.
EN-41
".