elero AstroTec-868 Original Bedienungsanleitung Seite 85

Programming
SETTING
INTERMEDIATE POSITION, VENTILATION/REVERSE, PROG 1
END LIMIT (Time/position programming)
See
INTERMEDIATE
previous page
POSITITION
You have confirmed the
HOLIDAY/LIGHT SENSOR menu levels.
INTERMEDIATE POSITION will appear.
1. You can set the switching time to move to the INTERMEDIATE
POSITION using the +/- button. The switching time is indicated in a few
seconds or you can move to the INTERMEDIATE POSITION from the
upper end limit using the UP/DOWN button.
2. Confirm by pressing OK.
3. You can set the switching time to move to VENTILATION/REVERSE
using the +/- button. The switching time is indicated in a few seconds or
you can move to the VENTILATION/REVERSE from the lower end limit
using the UP/DOWN button.
4. Confirm by pressing OK. PROG 1 END LIMIT appears.
5. You can select PROG 1 END LIMIT, PROG 1 INTERMEDIATE
POSITION and PROG 1 VENTILATION/REVERSE using the +/- button.
6. Confirm your selection by pressing OK.
The function PROG 1 END LIMIT has now been set.
Please read on for further programming options using the
SETTING menu.
OK
VENTILATION
(REVERSE)
+/–
+/–
OK
OK
PROG 1
END LIMIT
+/–
PROG 1
OK
INTERMEDIATE
POSITION
+/–
PROG 1
VENTILATION
OK
see
next page
EN-33