Programming
INDIVIDUAL INDIVIDUAL
Press +/- for the INDIVIDUAL menu level (1,2,3,4,5,6,7).
All further entries now refer to every individual day of the week.
Confirm by pressing OK.
8. Now set the SWITCHING TIME ▲ and the SWITCHING TIME
▼ using the +/- buttons. Confirm each entry by pressing OK.
9. Press the MENU button to switch to operating mode.
PROGRAMME
PROG 2/INDIVIDUAL WEEK (Individual switching time ▼▲ for week)
PROG 2/INDIVIDUAL BLOCK (Individual switching time ▼▲ for block 1/2)
PROG 2/INDIVIDUAL INDIVIDUAL (Individual switching time ▼▲ for
individual day)
PROGRAMME
OK
PROG 2
OK
OK
INDIVIDUAL
1. Press the MENU button.
2. To select the PROGAMME menu, press the
+ button until PROGAMME appears.
3. Confirm by pressing OK.
4. Press the + button. PROG 2 appears.
5. Confirm by pressing OK.
6. Press the + button until INDIVIDUAL appears.
7. Confirm by pressing OK.
OK
SWITCHING
WEEK
OK
▲
SWITCHING
+/-
+/–
PROGRAMM
K
OK
▼
+/-
+/–
EN-29