elero AstroTec-868 Original Bedienungsanleitung Seite 60

Initial operation/Factory settings
Initial operation
To activate the AstroTec-868/-868 bidi timer, touch any but-
ton on the device. To select the language required use the
+/- buttons and confirm your selection with the OK button. The
AstroTec-868/-868 bidi is now in automatic operating mode.
Factory settings
TIME/DATE: – Current GMT and current date
PROGRAMME: – ASTRO → BLOCK → IDLE PERIOD (1-5)
SETTING: – HOLIDAY OFF
– light sensor SUN 05 sunlight value
– PROG 1 END LIMIT, LONDON
– SUMMER/WINTER ON
FUNCTION: – ROLLER SHUTTER, EXPERT MODE OFF
Note : Press the Reset button (with a ballpoint pen or similar
object) to restore the factory settings of the
AstroTec 868/-868 bidi.
Exception: Function, language and city menu levels.
EN-8
(if light sensor is connected)
▲ 06:30 HRS
▼ No default idle period
IDLE PERIOD (6,7)
▲ 08:00 HRS
▼ No default idle period