Storage; In Case Of Problems; Troubleshooting; Disposal - STORZ & BICKEL Plenty Gebrauchsanweisung

6 . T H E H O T A I R G E N E R AT O R P L E N T Y

6.4. Storage

Store the Hot Air Generator in a dry
place protected against the effects of
weather and out of the reach of chil-
dren or unqualified persons.

6.5. In Case of Problems

Immediately unplug the power cord
and ensure that no one can connect
the Hot Air Generator to the mains sup-
ply again without this being noticed.
Before any maintenance work is done,
the device has to be switched off and
the power plug unplugged from the
power supply.
Put the Hot Air Generator in the original
packaging, or pack it properly in other
packing material, and send it to our
Service Center.

6.6. Troubleshooting

Please make sure that the current is
on and that the fuse (in the mains fuse
box) is switched on and is not defec-
tive.
If the preceding tips do not
yield the desired results, or for
any other defects or problems
not mentioned here, please unplug the
power plug and contact our Service
Center immediately.
Do not open the Hot Air Gen-
erator! Without special tools
and specialized knowledge,
any attempt to open the device will
cause damage to it. Such an attempt
will invalidate the warranty claim.
Do not try to remedy the defect your-
self. Contact our Service Center di-
rectly.

6.7. Disposal

If the Hot Air Generator has been ir-
reparably damaged after the warranty
period, please do not simply throw
it away. As it is made of high qual-
ity, completely recyclable component
parts, it should be brought to a material
recycling center in your town or sent to
our Service Center for disposal. should
be brought to a material recycling cent-
er in your neighbourhood or sent to our
Service Center for disposal.
50